Securitron MM15-TS Bedienungsanleitung PDF herunterladen

Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader

Tel 800.624.5625 [email protected]

in door opening solutions

Page 1 Rev. C, 08/11

MM15-TS TAMPER SHIELD MOUNTING INSTRUCTIONS

* INCLUDED WITH MM15 LOCK, SEE INSTRUCTIONS INCLUDED WITH LOCK FOR

INSTALLATION.

The lock should be mounted as far from the hinge side of the door as possible for maximum

clearance of the Tamper Shield.

Locate the Armature and install the mounting hardware according to the instructions included

with the lock.

The spring washers fit between the Armature and the Tamper Shield. The washers will hold

tension on the Shield but allow it to be moved into position.

The Shield must be positioned with the door closed to allow about 1/16” clearance on the bottom

and equal spacing on each side. Open and close the door and verify that the Shield clears both

sides of the lock, adjust as necessary so the Shield does not hit the lock when the door is

opened and closed.

Once the Shield location has been verified the Tamper Shield MUST be secured to the

door. Mark the door in the centers of the small screw holes in the Shield. Use a 3/32” drill bit to

drill holes ½” deep in the door and Secure the Shield in place with the two #6 screws provided.

This keeps the Shield from moving out of position and preventing the door from closing. Apply

the threadlocker supplied to the threads of the Shoulder Screw for final assembly.

Seite 1

Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 [email protected] in door opening solutio

Keine Kommentare

Securitron MM15-TS Bedienungsanleitung