Securitron SAM Bedienungsanleitung

Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 [email protected] in door opening solution

PN# 500-10440 Page 10 Rev. F, 02/12 attracted to the Magnalock, but the strike and the interference buttons should pass completely into the lo

PN# 500-10440 Page 11 Rev. F, 02/12 6.5 Electrical Wiring The following diagrams, Figures 17, 18, 19 and 20 represent the proper electrical

PN# 500-10440 Page 12 Rev. F, 02/12 6.6 BondSTAT Sensor status wiring description  The green and white wires supply electrical connection w

PN# 500-10440 Page 13 Rev. F, 02/12 8 MAGNALOCK MAINTENANCE 8.1 Visual Inspection  Check the strike assembly for proper gap, suspension an

PN# 500-10440 Page 14 Rev. F, 02/12 Problem DPS Does Not Report Door Status Points of Reference Check strike mounting for proper alignment

PN# 500-10440 Page 15 Rev. F, 02/12 1.2.2 Example B: (24VDC system) Using Table 2 (24VDC) Find: - Current Draw .600 Amps - Wire Distan

PN# 500-10440 Page 16 Rev. F, 02/12 MAGNACARE LIFETIME REPLACEMENT WARRANTY For warranty information visit www.securitron.com/en/site/securit

PN# 500-10440 Page 2 Rev. F, 02/12 3.1 HARDWARE 10X 20X 1X Phillips Flat Head #10 X 3/4” Type “A” Socket Flat Head 10-32 X 3/8” Hex

PN# 500-10440 Page 3 Rev. F, 02/12 The door and frame areas additionally need to be examined for mortising capabilities, sufficient size and s

PN# 500-10440 Page 4 Rev. F, 02/12 Locate and mark the desired lateral centerline position for the Magnalock/strike assembly on the face of th

PN# 500-10440 Page 5 Rev. F, 02/12 It is recommended that the Magnalock face protrude approximately 1/16” [1.6mm] beyond the surface of the fr

PN# 500-10440 Page 6 Rev. F, 02/12 The serrations on the brackets are .050” [1.3mm] apart which matches the screw thread pitch distance that m

PN# 500-10440 Page 7 Rev. F, 02/12 5.6.3 Hollow Aluminum Door (Deep Recess Top) For mounting of the strike assembly into doors with deep rece

PN# 500-10440 Page 8 Rev. F, 02/12 5.6.5 Soft Core Wood Door Use of the end brackets is recommended when installing the strike assembly on so

PN# 500-10440 Page 9 Rev. F, 02/12 Slider Door Installation Figure 13 5.7 Strike Assembly Final Adjustments 5.7.1 Strike Level Adjustment