Securitron DT-7 Bedienungsanleitung PDF herunterladen

Securitron Magnalock Corp. Tel 800.624.5625 ASSA ABLOY, the global leader in

Phoenix, AZ www.securitron.com

door opening solutions

[email protected]

Page 1 Rev. C, 02/11

SECURITRON PRIME TIME MODEL DT-7

INSTALLATION AND OPERATING INSTRUCTIONS

1. DESCRIPTION

Securitron's Prime Time is a daily or weekly digital timer which operates on 12 to 24 volts AC or

DC and energizes and deenergizes a 10 Amp double pole, double throw relay according to

instructions set over a week. Toggle, or 2 types of pulsed relay operation may be selected.

2. POWER UP AND TIME SETTING

Identify terminals 1 and 2 marked "12-24 AC/DC". Apply a voltage source in this range to these

2 terminals. If a substantially greater voltage is applied the unit will be damaged.

Current drawn is 160 mA when the unit's relay is energized and 10 mA when the relay is

deenergized regardless of input voltage. Note that if DC voltage is used for power, polarity is

unimportant.

When power has been applied, the liquid crystal display on the rectangular plastic timer module

will come on showing the word "off" and "0000". The next step is to input the current time of

day into the timer module. To set the time of day, push and hold down the button farthest on

the left which shows the clock symbol. While holding this button down, set the hours by

repeatedly pushing the "H+" button. Note that if this button is held down, the hours will

automatically increment. Note also that the unit does not use AM and PM designation for the

hours, but rather employs military time based on a 24 hour system. For example, 22:00 hours

is the same as 10:00 PM.

In similar fashion, set the minutes by depressing the "M+" button while holding down the clock

symbol button. Finally, set the day of the week by pressing the day button while holding down

the clock symbol button. Once the time of day and the day of the week have been entered you

can release the clock symbol button.

FIG. 1: PRIME TIME OVERVIEW

BATTERY CLIP (AA CELL)

BACKS UP DISPLY MODULE

OBSERVE POLARITY

SELECT TOGGLE MODE

SELECT DOUBLE PULSE MODE

SELECT SINGLE PULSE MODE

DRY, DPDT, 10 AMP RELAY CONTACTS

FIRST MAN IN TERMINALS

BOARD POWER

12-24 VOLTS AC OR DC

NOTE: IF JUMPER BLOCK IS

MISSING, UNIT WILL NOT FUNCTION

SEE PARAGRAPH 6

Timer

Day

h+ m+

Reset

1 2 3 4 5 6 7

Inhaltsverzeichnis

Seite 1 - Page 1 Rev. C, 02/11

Securitron Magnalock Corp. Tel 800.624.5625 ASSA ABLOY, the global leader in Phoenix, AZ www.securitron.com door opening solutions techsupport@

Seite 2 - Page 2 Rev. C, 02/11

PN# 500-11800 Page 2 Rev. C, 02/11 3. TOGGLE MODE The toggle mode is selected when the jumper block is set to the "J1" (factory set)

Seite 3 - Page 3 Rev. C, 02/11

PN# 500-11800 Page 3 Rev. C, 02/11 relay is showing 'off'. Why doesn't it turn on?" The answer is that the DT-7 does not

Seite 4 - Page 4 Rev. C, 02/11

PN# 500-11800 Page 4 Rev. C, 02/11 5.1 BLOCK PROGRAMMING A common requirement is that programmed on/off times will be the same each day during

Seite 5 - Page 5 Rev. C, 02/11

PN# 500-11800 Page 5 Rev. C, 02/11 The best way to understand this feature is to use an application as an example. Returning to our example ci

Seite 6 - Page 6 Rev. C, 02/11

PN# 500-11800 Page 6 Rev. C, 02/11 from other manufacturers will work (be sure to specify a 6 volt DC coil). This relay physical type is very

Seite 7 - Page 7 Rev. C, 02/11

PN# 500-11800 Page 7 Rev. C, 02/11 8. DAYLIGHT SAVINGS TIME When the time changes twice a year to and from Daylight Savings Time, the time in

Kommentare zu diesen Handbüchern

Keine Kommentare

Securitron DT-7 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Securitron DT-7 herunter. Securitron DT-7 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Zuhause Securitron DT-7