Securitron DK-12 Bedienungsanleitung PDF herunterladen

Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader

Tel 800.624.5625 [email protected]

in door opening solutions

Page 1 Rev. C, 04/11

MODEL DK-12 DIGITAL KEYPAD SYSTEM

QUICK REFERENCE GUIDE

LIGHT INDICATORS

Single RED Light Flash = Program error or a 5 second timeout occurred at any time during a

programming step.

Double RED Light Flash = Valid program entry confirmation or the DK-12 was put into or taken

out of lockout mode.

Continuous RED Light Flashing = Relay is energized while the DK-12 is in relay timer mode;

flashes once per second.

Solid RED Light = The DK-12 is in passage mode, the DK-12 is in toggle mode and the relay is

energized, or the REX input is being held active.

Continuous YELLOW Light Flashing = System in program mode; flashes once every second.

Solid YELLOW Light = When not in program mode indicates that there are no codes in memory.

Single GREEN Light Flash = Key press.

Solid GREEN Light = 30-Second lockout occurred; light turns off after lockout time expires.

Double Backlight Flash = A valid user code was entered while the DK-12 was in lockout mode.

ENTER INTO PROGRAM MODE

1. Enter program code on the keypad.

2. Press either the ‘#’ or ‘’ keys.

3. Yellow light will flash indicating you are in programming mode.

Once in programming mode, the yellow light will continue to flash until you exit programming

mode by pressing either the ‘#’ or ‘’ keys or after a 30 second timeout period.

SETTING A CODE

The DK-12 uses a slot method to store codes. The program code is stored in slot ‘00’, the user

codes are stored in slots ‘01’ to ‘97’, the lockout mode code is stored in slot ‘98’, and the

passage mode code is stored in slot ‘99’.

1. Enter into program mode (see above).

2. Press two digit prefix for slot.

3. Enter desired code.

Note: Code length for program code must be 5 to 7 digits long.

Code length for all other codes must be 2 to 7 digits long.

4. When desired code is entered into appropriate slot you may press either the ‘#’ or ‘’ keys

or wait five seconds.

5. Wait for red light to flash twice (this confirms valid entry).

CHANGING A PROGRAM OR USER CODE

Changing a code is identical to creating a new code. The changed code is just written over any

existing code.

DELETE A CODE

1. Enter into program mode (see above).

2. Press two digit prefix number of code you wish to delete.

3. You must press the ‘#’ key twice to complete the deletion.

4. Wait for red light to flash twice.

PROGRAM SPECIAL FUNCTIONS

There are a variety of customized functions the DK-12 may perform. These just require the user

to enter a two or single digit command number.

1. Enter into program mode (see above).

2. Enter the two or single digit command followed by the ‘’ key; see list for the commands.

3. Red light will flash twice to confirm once the command is completed.

1 2

Inhaltsverzeichnis

Seite 1 - QUICK REFERENCE GUIDE

Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 [email protected] in door opening solution

Seite 2 - Page 2 Rev. C, 04/11

PN# 500-24015 Page 2 Rev. C, 04/11 COMMAND LIST AND FORMAT 70 Turns on the double beeper chirp that sounds when the relay is energized by use

Weitere Dokumente für Für Zuhause Securitron DK-12

Um das Dokument anzuzeigen Securitron DK-12 Bedienungsanleitung

Securitron DK-12 Bedienungsanleitung (8 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Securitron DK-12 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Securitron DK-12 herunter. Securitron DK-12 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Für Zuhause Securitron DK-12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Zuhause Securitron DK-12